บูตเตอร์แรงดันไฟกระแสตรง DC-DC Boost Voltage Converter 8-32V to 12-35V 72W
Feature:


Module Name: 72W boost module
Module properties: non-isolated module
Input Voltage: 8-32V
Output voltage :12-35V   (adjustable)
Output current: 3A (12V turn to 24V) ; 5A(12V turn to 19V)  (exceed 4A please enhance heat dissipation)
Output power: 72W (natural cooling), 100W (enhance heat dissipation )
Output ripple: less than 50mV ,20M bandwidth
Conversion efficiency: efficiency 92%(12 turn to 24V 3A ),  efficiency 93%(12 turn to 19V 3A)
Operating temperature: Industrial grade -40°c to +85°c (ambient temperature exceeds 40 degrees, reduce power or plus fan)
Full load temperature rise: 45°c
No-load current: typical 30mA
Load Regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please enter retrofitting fuse or protective circuit)
Input reverse polarity protection: None (If need please install diode at input port )
Wiring: Terminals, Needn't solder, V-IN input, V-OUT output
Module size: 65mm x 51mm


Some Applications:


DIY an output adjustable vehicle power supply, 12V input,14-35V output (adjustable)
Universal Car Laptop power. 12V Input , the output can be adjusted to the laptop operating voltage
Boost charger,such as, for the 24V battery
Power supply for electronic equipment
Front of a system power supply:when the input voltage is 10-18V and the system board requires about 24V output(high power)


Note:


Input voltage must be less than the output voltage, for example,when 24V output ,the range of input is 8-24V
12V 1 meter wire(1.5 m2),if longer than 1 meter,please use larger wire .
When needs to work on high-power, high-temperature or plus shell  please install a fan, be sure the  temperature of module heat sink not exceed 80°c
12V battery discharge voltage should not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage should not be lower than 2.7V

ไม่มีรับประกันสินค้า